×

Machine vision retrofits: di-soric CS-52 vision sensor and ID-520 code reader

Machine vision retrofits: di-soric CS-52 vision sensor and ID-520 code reader

Many older machines were built without image processing, because the vision systems available back then were too large, too slow and too expensive. A carefully planned retrofit offers an easy, cost-effective way to add image and pattern processing. The di-soric CS-52 vision sensor, which is on par with smart cameras, and the ID-520 code reader are among the smallest devices of their kind on the market. Combined with easy-to-use control software, they handle localization, detection, counting and measurement tasks in very confined spaces, improving performance and process reliability in existing systems.

Retrofit: upgrading instead of replacing

A retrofit is the process of technically updating, modernizing and optimizing existing machines and systems. The reasons vary: electrical installations, control systems and automation technology no longer meet current standards, systems are being discontinued, and replacement parts or components are no longer available. Expectations for usability and security are also higher.

Every retrofit starts with a comprehensive analysis of the current system. It determines which failure-prone and outdated components to replace, which new control, automation and safety technologies to implement, and how to adapt the system to changing requirements. The goals are greater functionality, flexibility and efficiency, along with lower energy and operating costs. Once upgraded, the system must meet current requirements for modern automation, safety, security and digitalization concepts, as well as applicable legal standards and regulations.

Modern retrofit projects increasingly take cybersecurity and the long-term maintainability of digital components into account. Under the Cyber Resilience Act (CRA), manufacturers of products with digital components are required to provide security updates and address vulnerabilities over a defined support period. For operators of long-lasting machinery, choosing components with long-term support is therefore becoming even more important.

Example: O-ring inspection on a 30-year-old assembly line

On a fully automated assembly line, a joining tool fits O-rings onto sleeves at a high cycle rate. The medium-sized parts supplier operating the line follows a strict zero-defect policy. Mounted a short distance from the process, the CS-52 vision sensor ensures that only sleeves with a present and intact sealing ring reach the next process station. With a short focal length of 3.6 mm, the small sensor reliably detects defects and instructs the control system to eject defective components.

The assembly line itself is essentially 30 years old. A recently completed retrofit brought it up to current state-of-the-art standards – resource-efficient, sustainable and at a lower cost than a new purchase. More reliable than ever, the system will continue to support the value-added process for years to come.

CS-52 and ID-520 at a glance

The CS-52 vision sensor and the ID-520 code reader share an identical design. Both are suitable for applications across various industries that previously offered little or no scope for image processing.

  • Dimensions of 25 mm x 45 mm x 53.7 mm – among the smallest and lightest devices on the market
  • 3.2 megapixel resolution
  • Focal length starting at 3.6 mm for extremely short working distances
  • Localization, detection, counting and measurement in a single device (CS-52)
  • nVision-i operating software that requires no programming knowledge

Paired with nVision-i, the CS-52 delivers performance that rivals much more expensive smart cameras at a comparatively low cost.

Mounted directly on the tool

Battery module production today is almost completely automated. A CS-52 vision sensor mounted on a robot's screwdriver captures the work area, the screw and the drill hole. As the screw is fed in, the sensor detects the precise position of the hole and transmits the calculated value to the robot, which positions the screwdriver accordingly. The compact housing and the cable outlet routed toward the flange allow highly space-saving integration directly on the tool and ensure maximum positioning accuracy. Moving with the tool, the CS-52 performs localization, detection, counting and measurement in one device, eliminating the need for additional testing and measurement stations.

With a reasonable investment of time and money, similar benefits can be achieved through retrofits – particularly on aging assembly lines for electronics, connectors and clips. Thanks to its compact size, the CS-52 is a natural fit for small inspection and test stations where image processing would previously have been unthinkable.

From 1D to 2D codes

Many existing systems still use traditional 1D barcodes and therefore rely on laser or line-scan barcode readers. At the same time, the market is shifting toward 2D codes. GS1 Sunrise 2027 is a global initiative by the GS1 standards organization that outlines the transition from traditional 1D barcodes (such as UPC/EAN) to modern 2D barcodes. When planning a retrofit, it is therefore worth reviewing code reading and identification on the machine as well.

As the di-soric distributor in Poland, Stoltronic can help you select the right CS-52 vision sensor or ID-520 code reader for your application and provide a quotation.

Source: di-soric (manufacturer)